Type C15 ‘P’ Series Solenoid Valve

Solenoid valve designed for direct mounting onto 1/4 turn pneumatically operated valve actuators meeting ‘NAMUR’ standard fixing dimensions.

Valve is illustrated with an Exia coil.

Body material available in:
• Aluminium (standard)
• Stainless Steel
• Brass

Seal kit available – VSKC15P

Interchangeable CNOMO interface coil units, including various hazardous area options
Integrated Exhaust to Sprint (ETS) feature in 3/2 position
Top face air connection
1/4″ BSP mains air connection and 1/8″ BSP exhaust ports, also available in NPT ports
Single coil spring return function or double coil stay put function
Pilot exhaust dust caps fitted as standard
Built in 3/2 to 5/2 function conversion facility for spring return and double acting actuators respectively
SIL 2 Capable (De-energise to trip @ HFT=0) SIL 3 Capable (De-energise to trip @ HFT=1) when used in 3/2 mode

	STANDARD
Body and End Caps	Black Anodised Aluminium (Dural)
Spool	Hard Anodised Aluminium PTFE Impregnated
Jet	Brass
Spacers	Glass Filled Acetal
Seals	Nitrile (Alternative Seals Available)
Spring	Music Wire
Mounting Screws	Stainless Steel
Change Over Plate	Nylon 66 30% Glass Filled
Gasket	Nitrile

	STANDARD
Inlet Port Connection Size	1/4″ BSP
Exhaust Port Connection Size	1/8″ BSP
Working Pressure	3 to 10 bar
Cv Factor	0.7
Flow Rate (at 6 bar with 1 bar pressure drop)	675 l/min
Maximum Ambient Temperature	+80°C
Minimum Working Temperature	-20°C

Namur Mounted Valves