E13A‑A 1/8″ BSP Banjo‑Mounted 3/2 Solenoid Valve (Normally Open or Closed)

The E13A‑A Series is a compact 3/2 direct‑acting solenoid valve designed for direct banjo bolt mounting onto 1/4‑turn pneumatically operated valve actuators with 1/8″ BSP ports. Its banjo‑mounted construction provides a low‑cost, space‑saving solution for actuator control while maintaining flexible coil and approval options. 

Key Benefits

• Banjo‑mounted design for direct actuator mounting using a single 1/8″ BSP banjo bolt 
• 3/2 direct‑acting operation, compact and mechanically simple 
• 1/4″ BSP mains air connection with 1/8″ BSP exhaust for straightforward piping 
• Normally open or normally closed spring‑return configurations available 
• Interchangeable coils, including hazardous and safe area options
• Pilot exhaust dust caps fitted as standard 

Typical Applications

The E13A‑A is ideally suited for direct control of quarter‑turn actuators, angle seat valves, and compact pneumatic devices where space is limited and a banjo‑mounted interface simplifies installation. 

Technical Specifications

Valve

• Function: 3/2 (3 port, 2 position) 
• Actuation: Direct acting 
• Working pressure: 0 to 10 bar 
• Operating modes: Normally closed or normally open (spring return) 

Connections

• Banjo connection: 1/8″ BSP
• Mains air inlet: 1/4″ BSP 
• Exhaust: 1/8″ BSP 

Materials (Standard)

• Body: Aluminium (standard)

Ordering Guidance

When specifying an E13A‑A, define:

1. Normally closed or normally open configuration 
2. Coil type and approvals (safe area or hazardous area options) 
3. Voltage 

Downloads & Support

• Datasheet: E13A-A - 1-8 inch, BSP, Banjo Mount, 3oo2, 1-4 inch BSP Mains Air Connection, 1-8 inch BSP Exhaust, Normally Open or Normally Closed [E13A-A - 1...lly Closed | PDF]
• Technical support: techsales@rosspneumatrol.com | +44 (0)1254 872277