United Kingdom

Cat 2 GD: Ex db IIC T6: IP66 Stainless Steel Housed Terminal Box ATEX Cat 2 compatiable for hazardous areas. CNOMO interface available in various materials.


  • Flameproof coil suitable for Zones 1 and 2, manufactured in accordance with the requirements of the European harmonised standards EN/IEC60079-0, EN/IEC60079-1 and EN/IEC60079-31.
  • Covered by Certificate of Conformity BAS No. BASEEFA06ATEX0123, category Exd IIC T3 to T6.




  • M20 x 1.5 conduit entry or 1/2″ NPT
  • Protection class IP66 according to ENBS60529
  • Connection by 2-pole 2.5mm2 terminal strip + earth
  • Continuously rated
  • Maximum permitted voltage variation ±10%
  • Internal and external earthing connection screw
  • Low power consumption
  • Wide range of voltages available
  • Approvals available – ATEX, IECEx, GOST CU TR, NEPSI



Coil CaseStainless Steel Epoxy Powder Coated
Armature and Fixed Pole PieceMagnetic Solenoid Quality Stainless Steel
SpringsStainless Steel
Seals and SeatsViton
Coil Former30% Glass Filled PBR
Magnetic WireClass H Coated Copper
Guide TubeStainless Steel



 DC Solenoid CoilAC Solenoid
Voltage Standard2424, 110, 240 (50/60 Hz)
Voltage Tolerance±10%±10%
Ambient Temperature-60 to +80°C-60 to +55°C
Duty Cycle100%100%
Degree of ProtectionIP66IP66
Electrical ConnectionJunction Box with M20 or ½” NPT Conduit EntryJunction Box with M20 or ½” NPT Conduit Entry
Power Consumption3W or 1.3WPull in – 10VA, Holding – 5VA
Pressure Range0 – 10 bar0 – 10 bar